Every Homeowner Needs Drill Bit Sets In The Garage
Go to: Previous Article Next Article
Choosing the right drill bit sets to have around the house is pretty easy. Getting some of all of them is the best. That way you can drill through wood, concrete, or metal. You can drill a small hole or a large one. You can even choose between metric or standard sizes. Having the right tool for the job is important, so make sure that you have many sizes and kinds to choose from.
Drill bits come in sizes from the size of a hair to around four inches in diameter. The smallest bits are usually used for working on jewelry or watches. The larger bits are used in construction. But most of them are handy to have around the house.
The size and shape of the shanks vary as well. There are short shanks for drilling in close spaces, and long ones to reach into a deep space. There are hex shaped and round shaped shanks. This helps them to fit in almost any drill, electric or cordless.
They can be used to drill through wood, metal, or concrete. They can be made from titanium, cobalt, or carbide and can be diamond tipped. What they are made of is what determines what they will drill through. The shape of the twists on the bit also helps determine what they will drill through. The twists on a woodworking bit are different from a metal bit, and the masonry bits are different still. Drill bit sets range in size from two to over three hundred bits. Most sets come in a storage case that is marked where each bit should go. This helps keep the sizes in order so they are easier to select the correct size for the hole you are going to drill.
Bits made for metal are made from harder metals like titanium and carbide, and almost always have a diamond tip. These types of bits have to resist heat and friction to keep from breaking or wearing out too quickly. That is why these metals are used.
Concrete or masonry bits are made for drilling through concrete and plaster. They are usually made from steel. The twists on these bits help go through cement easier than the twists on a wood bit would. They can also be hammer bits, to go in a hammer drill that beats while it turns to help get through the concrete faster.
Some bits are made for wood. These generally have a different type of twist that aids in the drilling. Some of the larger bits have teeth and are called 'hole saws'. These can drill a hole through a board or piece of wood for things like door knobs.
So, whether getting them for yourself or to give as a gift to someone else, choose the size set and the kind of set that you think will be the most used for the projects that are planned. Keep them in their cases so you can see at a glance the sizes. Make sure that your drill is handy and you will always be prepared for whatever needs to be drilled.
Article Source: Articlelogy.com
- Credit Cards A big selection of Cards in all flavors: Bad Credit Cards, Secured Cards, Prepaid Cards, Credit Cards for Canada, Low Interest Cards, etc -
Word Count: 533
Reduce Your Debts Without Bankruptcy. See How Much You Can Save. Free Debt Analysis
