Lighting A Coal Stove - Coal Dealer Tips
Go to: Previous Article Next Article
As you will soon find when talking to any coal dealer is that coal stoves are not that easy to get started. Plus there is a lot of work that needs to be carried out by you to ensure that the coal keeps burning at a regular temperature. Certainly if you do not keep to the right procedures you will soon find out just how easily a coal stove will go out.
In this article we provide several tips on the right ways to light a coal stove and which will ensure that it remains burning at a constant temperature once lit.
1. The first thing to do is lay some dry paper and kindling in your coal stove to act as the base and which you need to light and get burning well. Only once this has begun to burn well should you start to add some small pieces of hardwood to the stove.
2. During this stage of lighting your coal stove it is important that the draft control point (usually found at the base) is kept fully open. This will allow the fire inside the stove to get established and for it to reach the right temperatures. Once the wood has been added allow a good bed of embers to be produced from it and then you can start to add small amounts of coal to the stove.
3. Always gradually add small amounts of coal to the stove until you have built up a layer of about 1 to 2 inches of well burning coal in it. Adding too much will actually make it far more difficult for the coal to ignite because not enough air is getting in to cause a draft. Plus only add more coal to a stove when the rest already in there has become well lit.
4. It is crucial that you fill the stove up with coal to the highest point that you can as the deeper the bed of coal in it then better it will function. However, just because there is lots of coal in the stove does not mean it has to run continuously at high temperatures you can easily regulate by reducing the amount of air that is allowed to flow in to it.
5. However you should never start to close down the draft control on your coal stove until such time as the coal has all been ignited and is producing blue flames. Also never let your stove run with the draft control open for any extended period of time as this in fact can cause damage internally to your. Plus you need to ensure that the ash pan door of your coal stove is kept closed all the time.
As we have said previously a coal dealer will explain the difficulties of getting a coal stove started. However, if you keep in mind the steps we have provided above, you should find this particular task far easier. Also when it comes to lighting your coal stove only do so after the temperatures have fallen below 55 degrees Fahrenheit for several days on a trot. Unfortunately if you light before then the chimney attached to it will not be able to develop enough draft to help with the process of getting a fire lit.
Article Source: Articlelogy.com
Insurance Comparison Quotes - Selected Insurance Carriers eager to quote you a price, fast!-
Word Count: 556
Reduce Your Debts Without Bankruptcy. See How Much You Can Save. Free Debt Analysis
